ALEX

Screw the cam bolts into the drawer front (do this 2 times)

Push the sides onto the front (do this 2 times)

Lock the sides with the cam locks (do this 2 times)

Slide the bottom down the grooves (do this 2 times)

Drop the back in (do this 2 times)

Hammer the ribbed dowels through the sides (do this 2 times)

Lay the top face down and screw in the short cam bolts

Screw a runner onto each face of the divider

Stand the divider on the top

Lock the divider

Screw a runner inside each end panel

Fit the flap plates on the back rail

Tap dowels into the back rail and lay it on the top

Push the end panels onto the back rail

Set them on the top on dowels

Tap the dowels in for the lower panel

Put the lower panel on and screw it to the divider

Push the leg frames into the base frame

Click the top rail in at the back

Turn the frame over onto the box

Screw the frame to the box

Turn the desk over and press in the grommets

Drop the trough boards in

Screw the hinges under the flap

Clip the flap onto the plates

Slide the drawers in

Fit the drawer stops