12×6×
Screw the suspension fittings onto the open cabinet's sides
Wash-stand/wash-basin, 155 × 54.5 × 72 cm
1 h 25 min · two people · 42 steps · 35 panels · 118 fittings
Screw the suspension fittings onto the open cabinet's sides
Click the bottom onto one side
Click on the shelf and the top
Press the other side on
Slide the back panel in
Push the rivets through the back
Stand it up
Screw the suspension rail to the wall
Hang the open cabinet on the rail
Lock it to the rail
Screw the small brackets onto the sides
Screw the suspension fittings into the top back corners
Screw the runners onto the sides
Click the bottom onto one side
Click the middle panel on
Click the front rail on
Press the other side on
Lock the bottom and the middle panel with the white clips
Lock the front rail with the grey clips
Stand it up and check it's square
Screw the next rail to the wall
Hang the wash-stand beside it
Screw it to the cabinet beside it
Lock it to the rail
Screw the bottom to the wall
Build the other open cabinet the same way
Screw the next rail to the wall
Hang the open cabinet beside it
Screw it to the cabinet beside it
Lock it to the rail
Stick the bumpers onto the drawer bottom (do this 2 times)
Push the wire stays into the bottom (do this 2 times)
Push the sides onto the bottom (do this 2 times)
Slide the front down into the sides (do this 2 times)
Hook the back on (do this 2 times)
Lock it with the plugs and the turn clips (do this 2 times)
Drop in the divider (do this 2 times)
Pull the runners out and click on both drawers
Screw the support batten to the wall
Lay the countertop on
Cut the hole and set the wash-basin in
Fit the water trap