ÄNGSJÖN / BACKSJÖN

Screw the suspension fittings onto the open cabinet's sides

Click the top and bottom onto one side

Press the other side on

Slide the back panel in

Push the rivets through the back

Stand it up

Screw the suspension rail to the wall

Hang the open cabinet on the rail

Lock it to the rail

Screw the small brackets onto the sides

Screw the suspension fittings into the top back corners

Screw a runner onto each side

Click the bottom onto one side

Click the front rail on

Press the other side on

Lock the bottom with the white clips

Lock the front rail with the grey clips

Stand it up and check it's square

Screw the next rail to the wall

Hang the wash-stand beside it

Screw it to the cabinet beside it

Lock it to the rail

Screw the bottom to the wall

Build the other open cabinet the same way

Screw the next rail to the wall

Hang the open cabinet beside it

Screw it to the cabinet beside it

Lock it to the rail

Stick the bumpers onto the drawer bottom

Push the wire stays into the bottom

Push the sides onto the bottom

Slide the front down into the sides

Hook the back on

Lock it with the plugs and the turn clips

Screw the support onto the back

Drop in the divider

Pull the runner out and click on the drawer

Screw the support batten to the wall

Lay the countertop on

Cut the hole and set the wash-basin in

Fit the water trap