ÄNGSJÖN / BACKSJÖN

Screw the small brackets onto the sides

Screw the suspension fittings into the top back corners

Screw the runners onto the sides

Click the bottom onto one side

Click the middle panel on

Click the front rail on

Press the other side on

Lock the bottom and the middle panel with the white clips

Lock the front rail with the grey clips

Stand it up and check it's square

Screw the suspension rail to the wall

Hang the wash-stand on the rail

Lock it to the rail

Screw the bottom to the wall

Stick the bumpers onto the drawer bottom (do this 2 times)

Push the wire stays into the bottom (do this 2 times)

Push the sides onto the bottom (do this 2 times)

Slide the front down into the sides (do this 2 times)

Hook the back on (do this 2 times)

Lock it with the plugs and the turn clips (do this 2 times)

Screw the support onto the back (do this 2 times)

Drop in the dividers (do this 2 times)

Pull the runners out and click on both drawers

Screw the support batten to the wall

Lay the countertop on

Cut the hole and set the wash-basin in

Fit the water trap