BAGGEBO

Screw the drawer runners onto the side and the small divider

Slide the runners open and screw the back ends

Tap the long dowels into the left shelf and bottom

Tap short dowels into their other ends

Screw the left shelf and bottom to the side

Tap dowels into the long panel

Screw two cam bolts into the long panel

Stand the small divider on the long panel

Turn its cam locks

Screw two cam bolts under the long panel

Tap two dowels into the end of the divider

Push the divider onto the long panel

Lock the divider

Join the two halves

Screw the side to the long panel

Push the double cam bolts through the divider

Push the right shelf onto the bolts

Lock the right shelf

Tap dowels into the right bottom

Slide the right bottom in

Tap dowels into the right ends

Fit the right side and screw it on

Stand it up and tap dowels into the tops

Screw the wall bracket onto the small divider

Screw six cam bolts under the top

Turn the top over and lower it on

Lock the top

Lay it on its front and the back on

Mark the panels on the back

Nail the back on

Knock the glides in

Stand it up and screw the magnetic catch under the long panel

Fit the hinge bushes and plates

Screw the catch plate onto the door

Push the two pivot pins into the door

Set the door on the lower plate

Click the top pin into the upper plate

Screw on the knob

Screw it to the wall

Screw four cam bolts into the drawer front

Stand the drawer sides on the front

Lock the sides

Slide the bottom into the grooves

Knock the back on

Screw the knob onto the drawer

Pull the runners out

Slide the drawer onto the runners

Pull the drawer out to the stop

Screw the runners to the drawer

Push the drawer shut