16×
Screw the hinge plates onto the dividers
TV bench, 180 × 41 × 49 cm
1 h · two people · 40 steps · 38 panels · 225 fittings
Screw the hinge plates onto the dividers
Screw in the flap stops
Stand the dividers on the bottom
Screw the dividers on from below
Screw the cam bolts into the end panels
Push the end panels onto the bottom
Turn the cam locks in the bottom
Screw the cam bolts into the top
Stand it up and lower the top on
Turn the cam locks under the top
Lay it on its front and screw on the feet
Press a felt pad under each foot
Mark the dividers on the back edges
Lay the two backs on and tack their corners
Mark the dividers on the backs
Nail the backs on
Stand it up and screw on the wall bracket
Screw the bracket to the wall
Screw in the drawer runners
Put in the shelf pins
Slide in the two shelves
Screw two hinges onto each flap
Screw a rail along each flap
Click the flaps onto the hinge plates
Screw the cam bolts into both drawer fronts
Screw a castor onto each front
Stand the drawer sides on the fronts
Turn the cam locks in the drawer sides
Slide the drawer bottoms into the grooves
Lay the drawer backs on
Knock in the fittings for the backs
Pull the runners out
Put the drawers on the runners
Line up the drawer fronts
Wipe off the fingerprints
Screw a rail onto each drawer
Screw the tray together
Press the rubber strips in
Stick on the bumpers
Lift the tray into the left drawer