14×12×
Screw the runners onto the beams
Day-bed w 2 drawers/2 mattresses, 80 × 200 cm
2 h 15 min · two people · 27 steps · 50 panels · 218 fittings
Screw the runners onto the beams
Screw the castors under the beams
Tap the dowels into the beams
Screw the cam bolts into the back of the pull-out
Stand the beams on the back and lock them
Fit the front of the pull-out
Screw the front to the beams
Screw the slat rails inside the pull-out
Lay the slats on the pull-out
Prepare the end panels
Press the round connectors into the back panel
Join the ends to the back together
Fit the front rail
Tap the glides into the end panels
Screw on the slat rails
Lay the slats on the frame
Put the mattresses on
Screw the cam bolts into each drawer front (do this 2 times)
Tap in the dowels and stand the sides on the front (do this 2 times)
Lock the cam locks (do this 2 times)
Slide in the drawer bottom (do this 2 times)
Tap on the back (do this 2 times)
Stick the bumpers inside the front (do this 2 times)
Fit the runners to each drawer (do this 2 times)
Fit the back bar (do this 2 times)
Screw on the handle (do this 2 times)
Slide in both drawers