BROR

Push a foot into each end of the base frames

Stand the sides on the base frames

Set in the bottom and turn in six bolts

Swing the lower back panel into place

Lock it with the tabs

Swing in the upper back panel

Lock it with the tabs

Screw a wall bracket into each top back corner

Lay the top on

Lock the top with the tabs

Bolt the top on from below

Tighten the bracket screws

Tighten the six bolts

Push a foot onto each post

Hook the side beams into two posts

Build the other side the same way

Stand the sides up and hook in the long beams

Click a support bar into each level

Lay a shelf on each level

Hang a rail on each side

Fix it to the wall

Slide the cabinet in onto the rails

Bolt the cabinet to the rails

Hook a bracket over the cabinet top

Bolt the brackets down

Tip the shelf in

Clip in the shelf holders

Lift the shelf onto the holders

Lock the shelves with the clips

Push the pivot pins into the bottom

Stand the left door on its pin

Drop the hinge pin through the top

Hang the right door the same way

Drop the hinge pin through the top