BROR

Push a foot into each end of the base frames (do this 2 times)

Stand the sides on the base frames (do this 2 times)

Set in the bottom and turn in six bolts (do this 2 times)

Swing the lower back panel into place (do this 2 times)

Lock it with the tabs (do this 2 times)

Swing in the upper back panel (do this 2 times)

Lock it with the tabs (do this 2 times)

Screw a wall bracket into each top back corner (do this 2 times)

Lay the top on (do this 2 times)

Lock the top with the tabs (do this 2 times)

Bolt the top on from below (do this 2 times)

Tighten the bracket screws (do this 2 times)

Tighten the six bolts (do this 2 times)

Push a foot onto each post

Hook the side beams into two posts

Build the other side the same way

Stand the sides up and hook in the long beams

Click a support bar into each level

Lay a shelf on each level

Hook the brace halves together

Bolt the bars together where they cross

Bolt the brace across the back

Stand the second unit's first posts in joining feet

Bolt the new posts to the old ones

Hook the side beams into the new posts

Build its far side on the floor

Stand it up and hook in the long beams

Click in the support bars and lay the shelves on

Hook the brace halves together

Bolt the bars together where they cross

Bolt the brace across the back

Hang a rail on each side in each unit

Fix it to the wall

Slide the cabinets in onto the rails

Bolt the cabinets to the rails

Hook a bracket over each cabinet top corner

Bolt the brackets down

Tip the shelf in in each cabinet

Clip in the shelf holders in each cabinet

Lift the shelf onto the holders in each cabinet

Lock the shelves with the clips in each cabinet

Push the pivot pins into the bottom in each cabinet

Stand the left door on its pin in each cabinet

Drop the hinge pin through the top

Hang the right door the same way in each cabinet

Drop the hinge pin through the top