12×
Tap dowels into the ends of the bottom rail
Bed frame with 2 storage boxes, Twin, 97 × 191 cm
1 h 40 min · two people · 38 steps · 27 panels · 189 fittings
Tap dowels into the ends of the bottom rail
Fit a double cam bolt into each leg
Push the legs onto the bottom rail and lock them
Slide the panel into the grooves
Fit dowels and double cam bolts into the tops of the legs
Put the top rail on and lock it
Screw the connector bolts into the legs
Press the glides under the legs
Tap dowels into the ends of the bottom rail
Fit the double cam bolts into the bottom rail
Push the posts onto the rail ends and lock them
Slide the panel into the grooves
Tap dowels into the tops of the posts
Push double cam bolts into the posts
Push the top rail on
Turn it over and lock the cam locks
Press the glides under the posts
Tap the dowels into the side rails
Stand the headboard up and push a side rail onto it
Bolt the side rail to the post
Fit the other side rail the same way
Press the bed connectors into the side rails
Fit the footboard and tighten the connectors
Screw the slat rails to the side rails
Screw the two braces under the frame
Square the frame and lock the braces
Fit the slat holders at the ends of the rails
Stick the strips along the slat rails
Lay in the slatted base
Screw the cam bolts into a box front (do this 2 times)
Tap the dowels into the box sides (do this 2 times)
Stand the sides on the front and lock them (do this 2 times)
Put the back on (do this 2 times)
Lock the back with the cam locks (do this 2 times)
Turn it over and slide in the bottom (do this 2 times)
Screw the bottom on (do this 2 times)
Screw on the castors (do this 2 times)
Roll the boxes under the bed