Cut the two cable ties holding the bed
3-seat sleeper sofa with chaise
55 min · two people · 40 steps · 25 panels · 48 fittings
Cut the two cable ties holding the bed
Hang the back rail on its two hooks
Lift the bed and screw in the wing bolt
Unfold the bed
Lower the backrest onto the side plates
Bolt the backrest to the side plates
Lift out the loose bar
Hook the bed fabric over the back of the frame
Push the bar into the fabric's pocket
Screw the bar's ends to the frame
Unroll the mattress and lay it on the bed
Fold the bed back in
Open the lid and lift out what's inside
Tip the box onto its side and push the back end against it
Bolt them together
Screw in the six legs
Stick a felt pad under each leg
Stand the chaise up
Turn the armrests over and screw in the legs
Stick a felt pad under each leg
Pull the cover down over the backrest
Fasten the cover along the back and the ends
Fit the cover's front panel and fasten it underneath
Fit the cover around the storage box
Pull the cover over the lid and zip it closed
Pull the cover down over the back end
Pull the covers over the armrests
Turn it over and fasten the cover underneath
Screw a rod into the armrest
Stand the chaise on its back end and push the armrest on
Bolt the armrest on from inside the chaise
Tighten a washer and nut onto the rod
Screw a knob onto each of the rods
Pull out the bed and hold the armrest against the end
Screw in the other two knob bolts
Screw a bolt head onto each short stud
Push the chaise against the end of the sofa-bed
Screw a knob onto each stud
Zip the covers onto the seat cushions and lay them in
Fill the back cushions and stand them in place