FINNALA

Screw the rods into the seat frame

Lower the backrest frame onto the rods

Tighten a washer and nut onto each rod

Screw the rods into the top panel

Lower the top panel onto the backrest

Tighten a washer and nut onto each rod

Cut the two cable ties holding the bed

Hang the back rail on its two hooks

Lift the bed and screw in the wing bolt

Unfold the bed

Lower the backrest onto the side plates

Bolt the backrest to the side plates

Lift out the loose bar

Hook the bed fabric over the back of the frame

Push the bar into the fabric's pocket

Screw the bar's ends to the frame

Unroll the mattress and lay it on the bed

Fold the bed back in

Open the lid and lift out what's inside

Tip the box onto its side and push the back end against it

Bolt them together

Screw in the six legs

Stick a felt pad under each leg

Stand the chaise up

Turn the corner section upside down and screw in the legs

Stick a felt pad under each leg

Turn it over and screw on the two U brackets

Turn the armrests over and screw in the legs

Stick a felt pad under each leg

Screw the rods into the armrest

Push the armrest onto the end of the section

Tighten a washer and nut onto each rod

Screw a rod into the armrest

Stand the chaise on its back end and push the armrest on

Bolt the armrest on from inside the chaise

Tighten a washer and nut onto the rod

Stand the corner section where the sofa will go

Screw a hanging pin into the end of the section

Lift the section onto the corner's brackets

Screw two short studs into the side of the corner

Pull out the bed and push the sofa-bed onto the studs

Screw a bolt head onto each short stud

Push the chaise against the end of the sofa-bed

Screw a knob onto each stud

Lay the seat cushions in

Fill the back cushions and stand them in place