FINNALA

Screw the rods into the seat frames

Lower the backrest frames onto the rods

Tighten a washer and nut onto each rod

Screw the rods into the top panels

Lower the top panels onto the backrests

Tighten a washer and nut onto each rod

Screw the joining bolt into one backrest half

Hook the other half onto the bolt head

Turn the backrest upside down and lay the seat frame on it

Bolt the seat frame to the backrest

Screw in the four legs

Stick a felt pad under each leg

Turn it over and screw on the four U brackets

Turn the armrests over and screw in the legs

Stick a felt pad under each leg

Fit the covers over the top panels

Pull the covers down over the backrests

Pull the cover over the seat frame and fasten it

Fit the cover on the corner post

Pull the cover down over the corner backrest

Pull the covers over the armrests

Turn it over and fasten the cover underneath

Screw the rods into the armrests

Push the armrests onto the ends of the sections

Tighten a washer and nut onto each rod

Stand the corner section where the sofa will go

Screw a hanging pin into the end of the section

Lift the section onto the corner's brackets

Screw a hanging pin into the end of the section

Lift the section onto the corner's brackets

Zip the covers onto the seat cushions and lay them in

Fill the back cushions and stand them in place