14×
Tap the dowels into the back panel
Day-bed w 2 drawers/2 mattresses, 80 × 200 cm
2 h 15 min · two people · 30 steps · 56 panels · 284 fittings
Tap the dowels into the back panel
Screw the cam bolts into the end panels
Join the end panels to the back panel
Screw the front rail between the end panels
Push in the cam locks for the upper panels
Lower the backrest onto the back panel
Lower the upper end panel on
Turn the four cam locks
Screw the backrest to the upper end panel
Lay it on its back
Screw the slat rail to the back panel
Fit the two centre supports
Stand it up
Lay in the twelve slats
Hammer in the five clips
Screw a slat rail onto a long panel
Fit the two pull-out ends
Screw the castors onto the four beams
Fit the other long panel
Screw the four runners inside
Screw the beams to the slat rails
Lay in the thirteen slats
Push the pull-out bed under the daybed
Start the drawers on their fronts (do this 2 times)
Stand the sides on the fronts
Slide in the support rods and bottoms
Fit the drawer backs
Screw the runners onto the drawers
Slide the drawers in
Lay the mattresses on