Print: GURSKEN chest of 3 drawers | My Assemble Assistant

Drawing step 1 of 25

Assembly guide

GURSKEN

Chest of 3 drawers

1 h 30 min · one person · 25 steps · 21 panels · 121 fittings

Tools

Phillips screwdriver
Hammer
Drill (nice to have)
Pencil (nice to have)
Box cutter (nice to have)

Panels

ASide panel2×
BTop1×
CBack rail1×
DPlinth1×
EBack panel1×
FDrawer front3×
GDrawer side6×
HDrawer bottom3×
JDrawer back3×

Fittings

Drawer rail 330 mm6×
Screw 3.5 × 12 mm12×
Wooden dowel 8 × 30 mm14×
Wall bracket 2×
Washer 16 mm4×
Screw 4 × 16 mm2×
Connector screw 6 × 50 mm8×
Nail 1.6 × 20 mm19×
Felt pad 4×
Screw 5 × 50 mm2×
Cam bolt 34 mm12×
Cam lock 15 mm12×
Plastic pin 12×
Knob 3×
Screw 4 × 25 mm3×
Drawer stop 12 × 10 mm6×
Wall plug 8 × 35 mm (not in the box)2×

Follow it in 3D, read out loud: myassembleassistant.app/build/gursken-chest-3-drawersNot affiliated with IKEA. Check each step against the paper manual.

16×12×

Screw the drawer rails inside both sides

24×

Tap dowels into the ends of the top

32×2×2×

Screw the wall brackets onto the top

42×

Screw the top to one side

54×

Tap dowels into the back rail and the plinth

61×

Screw the back rail to the side

GURSKEN, Chest of 3 drawers2 / 6

71×

Screw the plinth to the side

84×

Push on the other side and screw it

9

Lay the back on

104×

Nail the back at the top

1115×

Nail the rest of the back

124×

Turn it over and tap in the felt pads

GURSKEN, Chest of 3 drawers3 / 6

13

Stand it against the wall and mark the holes

142×2×2×

Screw it to the wall

154×

Screw the cam bolts into a drawer front

162×

Tap a dowel into each drawer side

174×

Fix the sides to the front

18

Slide in the drawer bottom

GURSKEN, Chest of 3 drawers4 / 6

19

Put the drawer back in

204×

Tap in the plastic pins

211×1×

Screw on the knob

222×

Push in the drawer stops

238×4×8×8×

Build the other two drawers (do this 2 times)

24

Slide the drawers in

GURSKEN, Chest of 3 drawers5 / 6

25

Turn the drawer stops

GURSKEN, Chest of 3 drawers6 / 6