12×4×
Screw the small brackets onto the sides
Wash-stnd w drs/deep wash-basin/tap, 62 × 49 × 72 cm
1 h 1 min · one person · 24 steps · 11 panels · 57 fittings
Screw the small brackets onto the sides
Screw a suspension fitting onto each side
Screw the hinge plates onto the sides
Click the back panel into one side
Click the front rail in
Press the other side on
Push the white wedges into the top joints
Push the grey wedges into the bottom joints
Screw the suspension rail to the wall
Hang the wash-stand on the rail
Lock it to the rail
Screw the bottom to the wall
Screw the joining plate onto the stretcher
Lay the stretcher across the top and screw it to the back panel
Push the door stop into the front rail
Join the shelf to its upstand
Fit the shelf supports and lay the shelf on
Stick a bumper on each door
Press the hinges into the doors
Click the doors onto the hinge plates
Line up the doors
Set the basin on a bead of silicone
Let it set, then seal the joints
Fit the waste and the water trap