12×4×
Screw the small brackets onto the sides
Wash-stnd w drawers/wash-basin, 82 × 49 × 77 cm
1 h 25 min · one person · 28 steps · 22 panels · 78 fittings
Screw the small brackets onto the sides
Screw a suspension fitting onto each side
Screw the drawer runners onto the sides
Click the back panel into one side
Click the back rail and the front rail in
Press the other side on
Push the white wedges into the top joints
Push the grey wedges into the bottom joints
Screw the suspension rail to the wall
Hang the wash-stand on the rail
Lock it to the rail
Screw the bottom to the wall
Stick two bumpers on the back of each front
Hook the wire clips into the drawer back (do this 2 times)
Click the sides onto the back (do this 2 times)
Slide the bottom into the grooves (do this 2 times)
Press the box front on (do this 2 times)
Lock the corners (do this 2 times)
Screw the support inside the back (do this 2 times)
Fit the divider in the top drawer
Pull the runners out
Put the 2 drawers on the runners
Hook the fronts on
Screw the wall batten to the wall
Lay the countertop on a bead of silicone
Seal along the wall
Set the basin on the countertop
Fit the waste and the water trap