HAVSTA

Screw the runners onto the sides

Screw the cam bolts into the sides

Tap the dowels into the bottom and the front rails

Push the bottom onto one side

Push in the front rails

Push on the other side and lock it

Screw the cam bolts into the top

Screw the wall brackets under the top

Tap the dowels into the top edges of the sides

Slide the top on from the back and lock it

Push the top fittings into the frame top

Press the top board on

Fit the back rail under the top

Slide in the back and screw it to the bottom

Tap the dowels into the plinth ends

Screw the cam bolts into the ends

Fit the brackets to the top edges

Lock the brackets with the pins

Join the ends to the front

Turn the cam locks in the front

Fit the back piece and lock it

Tap the dowels into the top edges

Lay it on its back together

Push the plinth onto the bottom

Fix the brackets to the frame

Press in the glides

Screw in the two adjustable feet

Stand it up together

Level it with the feet

Fix it to the wall

Screw the connector bolts into the drawer front (do this 3 times)

Tap the dowels into the drawer sides (do this 3 times)

Stand the sides on the front and lock them (do this 3 times)

Slide in the bottom (do this 3 times)

Tap the stop wire into the back (do this 3 times)

Put the back on and lock it (do this 3 times)

Screw on the knobs (do this 3 times)

Pull out the runners and slide the drawers in