Screw the cam bolts into the four corner posts
2-drawer chest, 54 × 66 cm
1 h 10 min · one person · 36 steps · 31 panels · 160 fittings
Screw the cam bolts into the four corner posts
Join each side panel to its two posts
Lock the cam locks in the side panels
Push the feet into the ends of the posts
Screw the runners onto the left side
Screw the runners onto the right side
Screw in the cam bolts for the rails
Lay the left side down and stand the front rails in it
Lock the rails with cam locks
Stand the back rail in
Lower the right side onto the rails
Lock the cam locks on this side
Screw the cam bolts into the top
Stand the frame up and put the top on
Screw the top down through the rails
Lock the top with cam locks
Lay it on its front
Lay the back panel on
Square it up and nail the other corner
Nail the back panel all round
Stand it up
Mark the wall
Screw the strap to the wall
Screw the strap to the frame
Tap the dowels into the drawer sides (do this 2 times)
Screw the cam bolts into the drawer front (do this 2 times)
Stand the sides on the front (do this 2 times)
Lock the cam locks (do this 2 times)
Slide in the drawer bottom (do this 2 times)
Tap on the drawer back (do this 2 times)
Screw the liner boards inside the sides (do this 2 times)
Fit the runners on the drawer (do this 2 times)
Screw on the knob (do this 2 times)
Screw the tray ends to one tray side
Slide in the tray bottom and close it with the other side
Slide in both drawers