HEMNES

Screw the castors under the four beams

Screw the right-hand runners onto the beams

Screw the left-hand runners on

Tap dowels into the beam ends

Screw the slat strip onto the long board

Screw the strip down along its length

Screw eight cam bolts into the long board

Stand the beams on the long board

Lock the beams

Tap dowels into the two ends

Stand the ends on

Lock the ends

Screw the slat strip onto the front panel

Screw eight cam bolts into the front panel

Lower the front panel on

Lock the front panel to the ends

Lock it to the beams

Screw three slats across

Push pins into the other ten slats

Stand it up and lay the slats in

Screw the slat strip onto the back panel

Screw the strip down along its length

Tap dowels into the end panels

Bolt the end panels to the back panel

Tip it upside down and fit the glides

Clip the front rail in

Turn it the right way up

Screw the L plates onto the two end slats

Screw the end slats in

Push a pin into twelve slats

Lay in the twelve slats

Push the pull-out bed in

Tap in the push-in dowels

Press the back cap on

Press the end caps on

Screw cam bolts into the drawer fronts and backs

Stand the sides on and lock them

Slide the drawer bottoms in

Put the backs on

Screw the runners onto the drawers

Screw a knob onto each drawer

Slide the drawers into the pull-out bed