HEMNES

Screw the threaded rods into the leg frames (do this 2 times)

Screw the cam bolts into the leg frames (do this 2 times)

Stand the drawer shelf in

Lock the shelf

Stand the front rail in

Lock the front rail

Fit the hinge plates on the back board

Stand the back board onto the rods

Tighten the rods with nuts

Stand the stretcher in

Lock the stretcher

Lower the right frame on

Lock the cam locks on this side

Tighten the nuts on this side

Screw the back board to the shelf

Screw the cam bolts into the drawer front (do this 2 times)

Stand the sides on the front (do this 2 times)

Lock the cam locks (do this 2 times)

Slide in the drawer bottom (do this 2 times)

Lay the drawer back on (do this 2 times)

Screw the back on (do this 2 times)

Screw on the knob (do this 2 times)

Screw the runners to the sides (do this 2 times)

Check the runners (do this 2 times)

Screw the drawers under the top

Fit the middle block

Screw the block to the top

Tap two dowels into the top

Tap dowels into the back board

Lower the top on

Screw the top on through the side rails

Screw the top to the back board

Screw the back board to the middle block

Screw the hinges onto the cable flap

Click the flap onto the hinge plates

Press in the cable grommet