18×
Screw the cam bolts into the head posts
Bed frame with storage, Standard King, 150 × 200 cm
1 h 40 min · two people · 37 steps · 37 panels · 267 fittings
Screw the cam bolts into the head posts
Tap the dowels into the spindle panel and the board
Stand the spindle panel in the post
Stand the board in under it
Lay the other post on and lock it
Screw the hanger bolts into the posts
Tap the glides into the posts
Tap the dowels into the head blocks
Screw the blocks to the headboard
Tap the dowels into the foot blocks
Screw the blocks to the footboard
Tap the dowels into the side rails
Push the cam locks into the side rails
Join a side rail to the head and foot
Fit the other side rail
Screw the cross rail brackets to the side rails
Lay the cross rail in and screw it on
Screw on the runners for the left drawers
Screw on the runners for the right drawers
Screw in the corner braces
Lock the runners
Screw on the slat rails
Screw the beam brackets to the ends
Lay the centre beam in
Screw the beam in place
Roll out the slats and fit the holders
Screw the cam bolts into the drawer bottom (do this 4 times)
Press the connectors into the front edge (do this 4 times)
Tap a dowel into each side (do this 4 times)
Push the front onto the connectors (do this 4 times)
Stand the sides on the bottom (do this 4 times)
Lock the sides (do this 4 times)
Screw the cam bolts into the back (do this 4 times)
Stand the back on the bottom (do this 4 times)
Lock the back (do this 4 times)
Pull the runners out
Hang the drawers on the runners