Print: IDANÄS wardrobe, 121 × 211 cm | My Assemble Assistant

Drawing step 1 of 24

Assembly guide

IDANÄS

Wardrobe, 121 × 211 cm

2 h · two people · 24 steps · 24 panels · 146 fittings

Tools

Phillips screwdriver
Hammer
Drill (nice to have)
Pencil (nice to have)
Box cutter (nice to have)

Panels

ALeft side1×
BBottom1×
CRight side1×
DPlinth rail1×
ETop1×
FDivider1×
GClothes rail1×
HBack panel2×
JLeg4×
KShort rail2×
LLong rail2×
MCentre leg1×
NShelf2×
PDoor4×

Fittings

Plastic clip 16×
Wooden dowel 8 × 30 mm4×
Screw 7 × 50 mm3×
Hook 2×
Nut 6 mm2×
Screw 3.5 × 16 mm8×
Plastic clip 10×
Wooden dowel 8 × 40 mm4×
Screw 6 × 100 mm4×
Angle bracket 2×
Screw 4 × 14 mm2×
Foot 5×
Wall bracket 2×
Wall plug 8 × 40 mm2×
Washer 16 mm2×
Screw 5 × 70 mm2×
Shelf pin 5 mm8×
Hinge 12×
Screw 3.5 × 12 mm24×
Screw 4 × 13 mm24×
Knob 4×
Screw 4 × 25 mm4×

Follow it in 3D, read out loud: myassembleassistant.app/build/idanas-wardrobe-121-x-211Not affiliated with IKEA. Check each step against the paper manual.

13×

Hook the bottom into one side

23×

Hook the other side on together

34×

Fit the plinth rail

46×

Hook the top on together

54×2×

Fit the middle divider

62×2×

Hang the clothes rail

IDANÄS, Wardrobe, 121 × 211 cm2 / 5

7

Turn it over and slide in the back panels

88×10×

Screw and clip the back

9

Click two legs onto each short rail

10

Click in the long rails

114×

Tap the dowels into the bottom

12

Lower the underframe on together

IDANÄS, Wardrobe, 121 × 211 cm3 / 5

134×

Screw the underframe on

142×2×

Screw on the brackets

154×

Screw in the feet

161×1×

Screw in the centre leg

17

Stand it up together

182×

Screw the wall fittings to the back

IDANÄS, Wardrobe, 121 × 211 cm4 / 5

192×2×2×

Fix it to the wall

208×

Put in the shelves

213×6×

Screw the hinges to the doors (do this 4 times)

2224×

Screw the mounting plates inside

23

Hang the doors

244×4×

Screw on the door knobs

IDANÄS, Wardrobe, 121 × 211 cm5 / 5