KIVIK

Bolt the backrest onto the seat base

Pull the cover over the frame

Tip it onto its back and fasten the cover underneath

Pull the covers onto both armrests

Screw four rods into each armrest

Push the armrests onto the ends of the sofa

Tighten a washer and a nut onto each rod

Tip it onto its back and fit the four legs

Fix the connector to one backrest half

Hook the other half onto the connector

Turn the backrest over and lower the seat base onto it

Bolt the base to the backrest

Fit the four legs

Turn it over and screw on two brackets, hooks down

Screw on four more brackets, hooks up

Pull the cover over the corner section

Fasten the cover all round the base

Bolt the backrest onto the seat base

Pull the cover over the frame

Tip it onto its back and fasten the cover underneath

Take an armrest off the sofa

Fit it onto the corner section's sofa section

Stand the corner section where the sofa will go

Push a pin into the section's end and hang it on the corner

Push a pin into the sofa's end and hang it on the corner

Turn the chaise upside down and fit the four legs

Bolt the backrest onto the end of the frame

Pull the cover over the chaise

Turn it over and fasten the cover underneath

Take the armrest off the end where the chaise goes

Bolt the connecting rail to the end of the sofa

Screw the connecting bar along the bottom of the end

Stand the chaise on its back end and screw on the angle brackets

Hook the chaise onto the end of the sofa

Bolt the front bracket to the bar

Bolt the back bracket the same way

Tip the chaise down onto its legs

Fit the armrest onto the chaise's outer side

Zip the covers onto the seat cushions and lay them in

Fill the back cushions and stand them in place