KNOXHULT

Screw a wall fitting onto each side

Screw the cam bolts into the sides

Fit the feet into the sides

Tap the dowels into the bottom

Join the bottom to the left side

Lock the cams

Fit the foot into the plinth

Tap the dowels into the plinth

Push the plinth into the side

Screw a small angle bracket onto the plinth

Tap the dowels into the two rails

Fit the rails and screw them to the left side

Put the right side on

Lock the cams on that side

Screw the angle bracket to the bottom

Lay the back on and nail one corner

Nail the opposite corner

Nail a third corner

Nail the rest of the back

Screw the plinth support under the bottom

Screw the second small angle onto the plinth

Screw the angle to the support block

Screw the hinges into the door

Screw the hinge plates onto the cover panel

Screw two panel brackets onto the cover panel

Screw on the other two brackets

Hold the cover panel on the front

Screw the top bracket to the rail

Screw the side brackets to the side

Screw the bottom bracket to the bottom

Fit the filler strip beside the cover panel

Lay the worktop on

Screw the worktop down through the rails

Push in the shelf pins

Screw the worktop down at the front

Tilt the shelf in and lay it on the pins

Push it into place and level the feet

Mark and drill for the wall screws

Hook the fittings over the screw heads

Lock the fittings

Stick on the door bumpers

Click the door onto the hinge plates