KULLEN

Screw two cam bolts into the divider

Screw the runners onto the divider

Turn it over and do the other face

Stand the divider on the plinth

Lock it with a cam lock

Tap the dowels into the front rails

Push three rails onto the divider

Put the back rail on the divider

Lock it with a cam lock

Push on the other three rails and tap in the long rails' dowels

Screw the runners onto the sides

Put the left side on

Screw it to the plinth and the back rail

Put the right side on

Screw it on too

Fit the interlock rods

Screw the cam bolts into the top

Screw the wall brackets under the top

Tap the dowels into the top edges

Put the top on

Lock the top with cam locks

Lay the back panel on

Nail one corner

Square it up and nail the other corners

Nail the rest of the back

Tap the glides into the feet

Stand it up against the wall and mark through the brackets

Drill the holes and push in the plugs

Screw it to the wall

Tap the dowels into the drawer sides (do this 2 times)

Screw the cam bolts into the drawer front (do this 2 times)

Stand the sides on the front (do this 2 times)

Lock the sides with cam locks (do this 2 times)

Slide in the drawer bottom (do this 2 times)

Put the drawer back on (do this 2 times)

Tap in the ribbed pins (do this 2 times)

Turn it over and fit the interlock bar (do this 2 times)

Tap the dowels into the drawer sides (do this 4 times)

Screw the cam bolts into the drawer front (do this 4 times)

Stand the sides on the front (do this 4 times)

Lock the sides with cam locks (do this 4 times)

Slide in the drawer bottom (do this 4 times)

Put the drawer back on (do this 4 times)

Tap in the ribbed pins (do this 4 times)

Turn it over and fit the interlock bar (do this 4 times)

Push in the drawers

Screw in the drawer stops