LASTARE

Tap the foot sockets into the sides and screw in the feet

Screw the runners to the right side

Screw the runners to the left side

Fit sockets and feet to the plinth rail

Screw the L brackets onto the ends of the plinth rail

Lay the left side down and screw the plinth rail to it

Take the weights out of the bottom rail

Screw the steel rails to the side

Stand it up and fit the right side together

Put the weights back in the bottom rail

Slide the back panel down the grooves

Tap the dowels into the tops of the sides

Screw the wall brackets under the top

Screw the cam bolts into the top

Lower the top on

Lock the cam locks under the top

Clip the back to the back rail

Clip the back under the top

Fit the drawer interlock

Clip the interlock to the side

Press the drawer stops into the side

Mark, drill and plug the wall

Screw it to the wall

Fit the bumpers and cam bolts into a drawer front (do this 4 times)

Push the sides onto the front (do this 4 times)

Lock the sides with round cam locks (do this 4 times)

Slide in the drawer bottom (do this 4 times)

Clip the wire stop onto the bottom (do this 4 times)

Put the drawer back on (do this 4 times)

Push in the plastic dowels and the catch (do this 4 times)

Lock the back with round cam locks (do this 4 times)

Turn it over and screw on the runners (do this 4 times)

Slide in the drawers

Press the hole caps into the sides