LILLBERGET

Screw the runners onto both sides

Screw the cam bolts into both sides

Screw the corner brackets onto the plinth

Lay the right side down and screw the plinth to it

Tap a dowel into each rail

Stand the rails in the side

Lock the cam locks

Fit the top rail

Lower the left side onto the rails

Lock the cam locks on this side

Screw the plinth bracket to this side

Screw the wall brackets under the top

Screw the cam bolts into the top

Tap the dowels in and push the top on

Lock the top with cam locks

Tap the dowels into the back pieces

Slide the strip in under the top

Slide the back boards in after it

Put in the two long back screws

Screw the interlock box inside the right side

Clip the interlock latches into the holes

Push in the stops

Tighten the long back screws

Turn it onto its back and clip on the catches

Push the foot pads into the bottom edges

Stand it up

Push it against the wall and mark the holes

Drill the holes and push in the plugs

Screw it to the wall

Screw the cam dowels into a drawer front (do this 5 times)

Push the sides onto the front (do this 5 times)

Lock the sides with cam locks (do this 5 times)

Slide in the drawer bottom (do this 5 times)

Tap the wire stop into the drawer back (do this 5 times)

Put the drawer back on (do this 5 times)

Clip the catch into the right side (do this 5 times)

Push in the pins and lock them (do this 5 times)

Turn it over and screw on the runners (do this 5 times)

Slide in all 5 drawers