LILLBERGET

Screw the runners onto the sides and the middle panel

Screw the cam bolts into the panels

Screw the corner brackets onto both plinths

Stand the left side on its front edge and screw a plinth to it

Tap a dowel into each rail (do this 2 times)

Lay the rails in against the panel

Lock the cam locks

Fit the top rail

Push the middle panel onto the rails

Screw the second plinth to the middle panel

Tap a dowel into each rail

Lay the rails in against the panel

Lock the cam locks

Fit the top rail

Push the right side onto the rails

Screw the wall brackets under the top

Screw the cam bolts into the top

Tap the dowels in and push the top on

Lock the top with cam locks

Slide the two back panels in

Fix the back panels with the rivets

Screw the interlock box inside the right side

Clip the interlock latches into the holes

Push in the stops

Turn it onto its back and clip on the catches

Push the foot pads into the bottom edges

Stand it up

Push it against the wall and mark the holes

Drill the holes and push in the plugs

Screw it to the wall

Screw the cam dowels into a drawer front (do this 6 times)

Push the sides onto the front (do this 6 times)

Lock the sides with cam locks (do this 6 times)

Slide in the drawer bottom (do this 6 times)

Tap the wire stop into the drawer back (do this 6 times)

Put the drawer back on (do this 6 times)

Clip the catch into the right side (do this 6 times)

Push in the pins and lock them (do this 6 times)

Turn it over and screw on the runners (do this 6 times)

Slide in all 6 drawers