LOMMARP

Screw cam pins into the base sides

Tap dowels into the base front

Join the sides to the base front

Turn it over and tap dowels into the top edges

Screw the angle brackets onto the back rail

Tap dowels into the top of the back rail

Screw cam pins into the bottom panel

Lower the frame onto the bottom panel

Fit the back rail

Press the corner blocks in

Screw the brackets to the bottom panel

Lock the base with cam locks

Turn the base over

Screw cam bolts into the bottom panel

Screw cam bolts into the sides

Tap dowels into the fixed shelf

Join the fixed shelf to the sides

Turn it upside down and tap dowels in

Lower the sides onto the base

Lock the sides to the bottom

Screw two cam bolts into the fixed shelf

Tap dowels into the divider

Stand the divider on the fixed shelf

Slide the back panel down the grooves

Screw cam bolts into the top panel

Lay the top panel on

Rivet the back to the fixed shelf

Press the clips onto the back

Screw the wall spacers onto the back

Set it against the wall

Fix it to the wall

Screw the drawer runners in

Push in the shelf supports

Lay the shelves on

Press the bumpers into the doors

Screw the soft-close hinges onto the doors

Screw the plain hinges on

Clip the doors onto the cabinet

Screw the drop handles on

Screw cam bolts into the drawer front

Stand the sides on the front

Lock the sides to the front

Slide the bottom into the grooves

Screw cam bolts into the drawer back

Fit the back on the sides

Press two bumpers into the drawer front

Fit the stabiliser bar

Screw the knobs on

Put the drawer on the runners

Clip the release catches under the front