LOMMARP

Screw cam pins into the base sides

Tap dowels into the base front

Join the sides to the base front

Turn it over and tap dowels into the top edges

Screw the angle brackets onto the back rail

Tap dowels into the top of the back rail

Screw cam pins into the bottom panel

Lower the frame onto the bottom panel

Fit the back rail

Press the corner blocks in

Screw the brackets to the bottom panel

Lock the base with cam locks

Bolt the centre feet on

Turn the adjustable feet in

Turn the base over

Screw cam bolts into the bottom panel

Tap dowels into the sides

Stand the sides on the bottom panel

Screw the drawer runners onto the dividers

Screw cam bolts into the dividers

Tap dowels into the fixed shelf

Join the dividers with the fixed shelf

Tap dowels into the dividers' feet

Stand the middle section on the bottom panel

Slide the back panel down the grooves

Tap dowels into the top ends

Screw cam bolts into the top panel

Lay the top panel on

Rivet the back to the dividers

Press the clips onto the back

Level the centre feet

Screw the wall spacers onto the back

Set it against the wall

Fix it to the wall

Push in the shelf supports

Lay the shelves on

Press the bumpers into the doors

Screw the soft-close hinges onto the doors

Screw the plain hinges on

Clip the doors onto the cabinet

Screw the drop handles on

Screw cam bolts into the drawer front and back

Press two bumpers into the drawer front

Stand the sides on the front

Lock the sides to the front

Slide the bottom into the grooves

Fit the back on the sides

Fit the stabiliser bar

Screw the knob on

Put the drawer on the runners

Clip the release catches under the front