MALM

Screw the cam bolts into both sides

Push the glides into the bottom edges

Screw the L plates onto the plinth rail

Push two glides into the plinth rail

Lay one side down and screw the plinth rail to it

Tap the dowels into the rails

Stand the rails in the side

Lock the cam locks

Tap the dowels into the back rail

Stand the back rail in and lock it

Lower the other side onto the rails

Screw the L plate to this side

Lock the cam locks on this side

Screw the cam bolts into the top

Screw the wall brackets under the top

Stand it up and put the top on

Lock the top with cam locks

Lay it on its front

Lay the back panel on and nail the corners

Nail the back panel all round

Stand it up

Mark the wall through the brackets

Drill the holes and push in the plugs

Screw it to the wall

Screw the cam bolts into a drawer front (do this 3 times)

Tap in the dowels and stand the sides on the front (do this 3 times)

Lock the sides with cam locks (do this 3 times)

Slide in the drawer bottom (do this 3 times)

Put the drawer back on (do this 3 times)

Screw the back to the sides (do this 3 times)

Turn it upside down and fit the runners (do this 3 times)

Clip on the tilt stop (do this 3 times)

Slide in all 3 drawers