MALM

Screw the runners onto the left side

Screw the cam bolts into the left side

Screw the L plates onto a plinth rail

Push two glides into the plinth rail

Screw the plinth rail to the side

Tap the dowels into the rails

Stand the rails in the side and lock them

Screw the cam bolts into the middle panel

Lower the middle panel onto the rails

Lock it and screw on the L plate

Stand it up and screw the runners onto the middle panel

Screw four cam bolts into the middle panel

Screw the cam bolts into the right side

Screw the L plates onto a plinth rail

Push two glides into the plinth rail

Screw the other plinth rail to the right side

Tap the dowels into the rails

Stand the rails in the right side and lock them

Lift the left half onto the right half

Lock the rails to the middle panel

Screw the cam bolts into the top

Screw the wall brackets under the top

Stand it up and tap in the dowels for the top

Put the top on

Lock the top

Turn it upside down

Push in the glides

Lay it on its front and put the backs on

Nail the backs all round

Stand it against the wall and mark the brackets

Drill the holes and push in the plugs

Screw it to the wall

Screw the cam bolts into a drawer front (do this 6 times)

Tap in the dowels and stand the sides on the front (do this 6 times)

Lock the sides with cam locks (do this 6 times)

Slide in the drawer bottom (do this 6 times)

Put the drawer back on (do this 6 times)

Screw the back to the sides (do this 6 times)

Turn it upside down and fit the runners (do this 6 times)

Clip on the tilt stop (do this 6 times)

Slide in all 6 drawers