MANDAL

Slot the top frame together

Push the hinged pins into the top frame

Lock the pins with cam locks

Screw the cam bolts into the end panels

Stand the end panels on the pins

Put the long divider in between

Lock the end panels with 14 cam locks

Screw the end panels to the top frame

Fit the cross divider halves

Screw the support block onto the middle

Tap the dowels into the plinth bars

Bolt each plinth board onto its bar

Hook the plinth rails onto the end panels

Lock the rails to the end panels

Put the blocks on the cross bars

Lay the cross bars across the plinth

Bolt the blocks to the divider

Stick the felt pads on

Turn the bed over together

Screw the runners in on this side

Screw the runners in on the other side

Lay the slatted base in

Fix the slats with the strips

Screw the cam bolts into a drawer front

Push the drawer sides onto them

Lock the sides with four cam locks

Bolt on the drawer back

Slide the bottom in

Screw the runner onto the drawer

Build the other three drawers the same way

Slide the drawers in

Screw the hangers onto the back of the headboard

Screw the two bumpers on at the bottom

Fit the six shelves

Mark the wall for the two screws

Put the wall screws in

Hang the headboard together