METOD

Screw the cam bolts into the long box's sides

Screw a suspension fitting onto each side

Tap the dowels into the ends of the bottom

Press both sides onto the bottom

Lock the cams

Stand it up and slide the card from the box inside

Screw the back rail across the top

Lay it on its front and nail the back on at three corners

Nail on the two plastic brackets at the top

Nail the rest of the back

Lay it on its side and screw three cam bolts into the bottom

Tap the dowels into the short bottom and push it on

Lock the cams

Screw the cam bolts and a suspension fitting into the end panel

Push the end panel onto the short bottom and lock the cams

Stand it up and slide the short back down into its grooves

Screw the corner rail across the top front

Nail the short back on

Nail the rest of the short back

Lay it on its back and click on the legs

Stand it up together

Screw a suspension rail to each wall and hang the cabinet on them

Set it level and lock the fittings

Click on the cover caps

Screw it to the cabinet beside it

Screw the bottom bearing onto the bottom

Screw a hub under each tray

Push the rail posts in and close the rims

Set the lower tray on the bottom bearing

Fit the beam across the long box

Hang the upper tray and lock it

Screw the hinge plates onto one leaf

Screw the corner hinges onto the other leaf

Clip the leaves together and screw on the roller

Press the hinges into the door and screw their plates onto the end panel

Click the door onto the plates

Line up the door and stick on the bumpers