METOD

Screw the cam bolts into both sides

Tap the dowels into the ends of the bottom

Push the right side onto the bottom

Lock the cams

Screw the support block onto the fixed front panel

Screw the front panel onto the bottom

Push the left side on and lock the cams

Nail two plastic brackets where the front panel meets the left side

Tap a dowel into the end of the front strip

Turn it round and slide the front strip in

Screw the strip down onto the front panel

Stand it up and slide the card from the box inside

Screw the back rail across the top

Screw a suspension fitting onto each side

Lay it on its front and nail the backs on at three corners

Nail on the two plastic brackets at the top

Slide the joining strip in where the backs meet

Nail the rest of the backs

Stand it up and screw the post onto the front panel

Hook the hanging bracket onto the back rail

Slide the top brace in and push it back

Bolt the brace to the bracket

Screw the brace onto the support block

Screw the front rail across the top of the door opening

Press the two plugs into the bottom

Screw the three support plates onto the left side

Lay it on its back and click on the legs

Stand it up together

Screw the suspension rail to the wall and hang the cabinet on it

Set it level and lock the fittings

Click on the cover caps

Screw it to the cabinet beside it

Push in the shelf pins and lay the shelf on

Press the corner hinges into the door

Fit the hinge plates on the back of the front panel

Click the door onto the plates

Line up the door and stick on the bumpers