14×
Screw the cam bolts into both sides
Base cab 4 frnts/4 drawers, 80 × 37 cm
2 h 10 min · one person · 21 steps · 38 panels · 127 fittings
Screw the cam bolts into both sides
Tap in the dowels and join the sides to the bottom
Lock the cams
Stand it up and slide the card from the box inside
Click the clips onto the rails and screw them across the top
Lay it on its front and nail the back on at three corners
Nail on the two plastic brackets at the top
Nail the rest of the back
Stand it up and screw in the suspension fittings
Lay it on its back and click on the legs
Stand it up together
Screw the suspension rail to the wall and hang the cabinet on it
Pull it tight against the wall
Click on the cover caps
Click the back onto the drawer sides (do this 4 times)
Slide the bottom in and screw it to the back (do this 4 times)
Screw the front fittings on and click the front onto the drawer (do this 4 times)
Click the gallery rails on (do this 4 times)
Screw the runners into the cabinet
Put the 4 drawers on the runners
Stick on the bumpers