18×
Screw the cam bolts into both sides
Wall cabinet with door/2 drawers, 40 × 100 cm
1 h 28 min · one person · 25 steps · 21 panels · 103 fittings
Screw the cam bolts into both sides
Screw a suspension fitting onto each side
Tap dowels into one side and stand the top and bottom on it
Lock the cams on that side
Slide the card from the box inside
Lower the other side onto the dowels
Lock the cams on the second side
Lay it on its front and nail the back on at three corners
Nail on the two plastic brackets at the top
Nail the rest of the back
Screw the suspension rail to the wall and hang the cabinet on it
Pull it tight against the wall
Click on the cover caps
Click the back onto the drawer sides (do this 2 times)
Slide the bottom in and screw it to the back (do this 2 times)
Screw the front fittings on and click the front onto the drawer (do this 2 times)
Click the gallery rails on (do this 2 times)
Screw the runners into the cabinet
Put the 2 drawers on the runners
Stick on the bumpers
Push in the shelf pins and lay the shelf on
Press the hinges into the door
Screw the hinge plates onto the side
Click the door onto the plates
Line up the door and stick on the bumpers