METOD

Screw a suspension fitting onto each side

Screw the cam bolts into both sides

Screw the fixed shelf to the partition

Screw the top onto the partition

Tap the dowels into the ends

Stand the shelf and top on the right side

Lock the cams

Lower the left side on

Lock the cams on that side

Turn it onto its front and line the top's cut-out

Line the shelf's cut-out

Lay the back over the right compartment

Square it and nail one corner

Nail the opposite corner

Nail a third corner

Nail the rest of the back

Nail on the two plastic brackets

Screw the suspension rail to the wall and hang the cabinet on it

Pull it tight against the wall

Click on the cover caps

Push the two panel catches into the partition

Tap the dowels into the duct panel

Tip the panel in, top first

Slide it onto the catches and cap the holes

Push in the shelf pins

Tilt the shelves in and lay them on the pins

Press the hinges into the doors

Screw the hinge plates onto the side

Click the doors onto the plates

Line up the doors and stick on the bumpers

Ready for the hood