MICKE

Tap three dowels into the rail bottom board and stand the middle board on it

Tap three dowels into the middle board and press the top strip on

Screw four cam bolts into the side panel

Slide the rail onto the side panel

Turn the four cam locks in the rail

Screw three cam bolts into the end panel

Push the long board onto the end panel

Turn the three cam locks in the long board

Tap four dowels into the top edges

Screw six cam bolts into the underside of the top

Turn the end panel and long board over onto the top

Screw a cam bolt into the long board

Turn the side panel and rail over onto the top

Lock the side panel and end panel with four cam locks

Turn the three cam locks in the long board and the rail

Tap two dowels into the corner leg and stand it on the top

Screw the long board to the leg and the rail

Screw the leg frame onto the end panel

Push the three glides in

Stick the two pads under the leg frame

Cover the spare holes in the side panel

Stand the desk up and push in the cable outlet

Stand the post in the corner of the desk

Screw four cam bolts into the desk top

Screw a cam bolt into each straight top piece

Join the three top pieces

Lock the right inner upright under the top

Lower the top onto the post

Turn the cam lock at the foot of the upright

Fit the left inner upright

Turn the two cam locks in the upright

Screw two cam bolts in for the left column top

Tap three dowels into the end of the column top

Slide the column top and the tray in

Turn the cam lock in the column top

Fit the left outer upright

Turn its two cam locks

Screw two cam bolts in for the right column top

Tap three dowels into its end

Slide the right column top in

Turn the cam lock in the column top

Fit the right outer upright

Turn its two cam locks

Push in eight shelf pins and lay the right shelves on them

Screw a flap fitting onto the flap bottom

Slide on the flap front and the second fitting

Screw the second fitting on

Screw the fittings to the flap front

Screw the pivot bushings into the left column

Slide the flap compartment into the column

Screw the fittings to the uprights

Fit the two stop screws and close the flap

Push in eight shelf pins and lay the left shelves on them

Fit the left back panel

Screw it on from behind

Fit the right back panel

Screw it on from behind