MYLLRA

Screw the legs into the bottom board

Push a glide into each leg

Turn it over and screw in the cam pins

Tap dowels into the bottom board

Press the inner walls onto the bottom board

Lock the inner walls

Screw a runner to the left wall

Screw the other runner to the right wall

Screw cam pins into the two strips

Lay the strips on top of the walls

Lock the strips

Tap dowels into the side panels

Screw in the side panels' cam pins

Screw the runner stops to the side panels

Screw the drawer runners to the side panels

Screw on the runners for the pull-out board

Tap dowels into the curved shells

Screw cam pins into the shells

Slide the shells onto the side panels

Lock the shells

Stand the drawer box on a side panel

Fit the back rail

Slide the back panel down its grooves

Lay the other side panel on top

Lock this side

Turn it over and lock the first side

Stand it up and fit the shelf

Dowel the changing top

Lower the changing top on

Fix the top from underneath

Screw the back panel on

Screw the wall fitting to the back rail

Fix it to the wall

Dowel the frame of the pull-out board

Screw in its cam pins and lock it

Screw the slides under the pull-out board

Fit cam pins into the drawer fronts (do this 2 times)

Tap dowels into the drawer sides and stand them on (do this 2 times)

Lock the sides to the fronts (do this 2 times)

Slide the bottoms in (do this 2 times)

Fit the backs with their connectors (do this 2 times)

Screw the drawer runners on (do this 2 times)

Screw the rail under each drawer (do this 2 times)

Screw on the knobs

Screw the drawer stops to the backs

Hang the drawers on their runners

Screw cam pins into the guards

Fit the guards round the changing top

Lock the guards

Screw the connecting plates on