NÄSINGE

Screw a corner bracket onto each end of the long rails

Screw a runner stop onto each long rail

Screw four connector bolts into the long rails

Screw a stop stud into each long rail

Tap eight dowels into the inner rails

Push the cross rails onto the dowels

Tap a dowel into each end of the cross rails

Fold the long rails up onto the inner frame

Lock the cross rails with four cam locks

Screw the table lock onto one end rail

Screw the end rails onto the corner brackets

Press the two runners onto the long rails

Clip four slides into the runners

Lay one top half face down and slide the frame onto it

Slide on the other top half

Screw a stop stud into each top half

Screw the lock catch onto a top half

Screw two stop blocks under the top

Slide the two halves together

Check the lock clicks

Fit a barrel nut and two hanger bolts in each leg

Bolt the legs onto the corner brackets

Hammer a floor protector into each foot

Screw two stop blocks under the leaf

Screw the two leaf supports on

Screw the second lock catch onto the leaf

Turn the table over and store the leaf under the top

To make the table longer, lift the leaf up between the halves