1
Click the end stops onto the wall rail
Wardrobe with sliding doors, 200 × 66 × 236.5 cm
4 h 55 min · two people · 38 steps · 28 panels · 104 fittings
Click the end stops onto the wall rail
Mark where the rail goes on the wall
Drill the holes and push in the plugs
Screw the rail to the wall
Stand the folded frame up against the wall
Pull off the two tapes
Unfold it together
Open the sides out
Clip the four feet onto the sides
Clip a bracket onto each back foot
Drop the back plinth into the brackets
Hook the front plinth onto the front feet
Push in the two plinth clips
Clip two holders onto the back plinth
Press the R corner fitting onto the right side
Press the L corner fitting onto the left side
Hook the frame onto the wall rail
Level the feet
Push a dowel into each front foot
Screw the corner fittings to the rail
Push the two front fittings into the sides
Lift the top panel in from below
Push both corner fittings up
Turn the front fittings to lock the top
Tighten the screws in the corner fittings
Click the covers onto the corner fittings
Press the bottom panel in
Screw the clothes rail holders to the sides
Click the clothes rail into the holders
Push in the shelf pins and lay the shelves on them
Build the second wardrobe the same way
Screw the frames to each other
Screw the tracks across the top and the bottom
Screw two rollers onto the top of each door
Hang the back door
Hang the front door
Slide the doors to check them
Line up the doors