PAX / TYSSEDAL

Click the end stops onto the wall rail

Mark where the rail goes on the wall

Drill the holes and push in the plugs

Screw the rail to the wall

Stand the folded frame up against the wall

Pull off the two tapes

Unfold it together

Open the sides out

Clip the four feet onto the sides

Clip a bracket onto each back foot

Drop the back plinth into the brackets

Hook the front plinth onto the front feet

Push in the two plinth clips

Clip two holders onto the back plinth

Press the R corner fitting onto the right side

Press the L corner fitting onto the left side

Hook the frame onto the wall rail

Level the feet

Push a dowel into each front foot

Screw the corner fittings to the rail

Push the two front fittings into the sides

Lift the top panel in from below

Push both corner fittings up

Turn the front fittings to lock the top

Tighten the screws in the corner fittings

Click the covers onto the corner fittings

Press the bottom panel in

Screw the clothes rail holders to the sides

Click the clothes rail into the holders

Push in the shelf pins and lay the shelf on them

Screw the hinges into the doors

Screw the doors to the sides

Line up the doors

Stick on the bumpers

Build the narrow wardrobe the same way

Screw the frames to each other