11×2×
Screw the stop block under the leaf
Gateleg table, 67/124 × 75 cm
50 min · two people · 17 steps · 18 panels · 89 fittings
Screw the stop block under the leaf
Screw the stop cup under the leaf
Tap two dowels into the top
Screw the brackets to the long rails
Screw on the short rails
Screw the frame to the top
Fit a barrel nut and two rods into each leg
Fix the legs into the corners
Tap a dowel into each end of the middle stretcher
Bolt the side stretchers to it
Tap dowels into the ends of the side stretchers
Lower the stretchers in between the legs
Bolt the legs to the stretchers
Tighten the leg nuts again
Screw the hinges onto the gate
Screw the gate to the leg
Turn the table over and try the leaf