RIMFORSA

Drop a side bar into each end frame

Bolt the side bars in

Bolt a shelf rail to one end frame

Bolt the second shelf rail on

Bolt on the other end frame

Bolt the back grid rail between the frames

Bolt the front grid rail in

Bolt the braces to the grid rails

Bolt the braces to the legs

Turn it over and slide the grid in

Screw the front trim on

Clip in the shelf support

Lay the steel shelf on

Bolt the back top rail between the frames

Turn it round and bolt on the front top rail

Screw the divider in

Screw on the left runners

Screw on the right runners

Lay the top on and bolt it from below

Tighten the top's bolts

Push the feet into the legs

Slide the foot covers on

Set the bench level

Mark where the floor clips go

Screw the clips to the floor

Slide the bench onto the clips

Lower the feet into the clips

Screw the fronts onto the drawer trays

Screw on the handles

Pull the runners out

Set the drawers on the runners

Check the drawer catches

Hang the hooks on the right end

Peel the film off the steel shelf