14×4×
Lay out the legs and fit the barrel nuts and rods
Extendable table, 110/155 cm
40 min · one person · 18 steps · 13 panels · 86 fittings
Lay out the legs and fit the barrel nuts and rods
Tap two dowels into each leg
Bolt the legs onto the column
Fit barrel nuts and short rods in the column top
Tap two dowels into the column top
Screw the slides onto the frame
Push the two spring catches into the frame ends
Fit the leaf holders with dowels and cams
Lay the top halves face down and lock them
Set the frame on the top
Screw the slides to the top
Turn the base over onto the frame
Bolt four angle brackets to the column
Screw the brackets to the frame
Turn the table over together
Pull the halves apart and take out the transport screws
Unfold the leaf and lay it in
Push the halves together and lock the latches