ROSENTORP

Tap dowels into the cross bars

Push the runners onto the cross bars

Screw four cam studs into the slide rails

Screw two pins into the slide rails

Screw a corner bracket onto each slide rail

Press the slide rails onto the frame

Tighten the four cam locks

Screw the catch onto the end apron

Screw the end apron to the brackets

Tap dowels into the long aprons

Lay the top face down and screw in ten cam studs

Bolt the long aprons onto the top

Tighten the ten cam locks

Slide the frame into the aprons

Fit the other end apron with two corner brackets

Fix it with two long bolts

Screw on the stop block

Push the end section on until it clicks

Screw two pins into the end section

Screw its short aprons to the brackets

Bolt the end section on

Fit a dowel, barrel nut and two rods in two legs

Fit two legs on the brackets

Prepare the other two legs

Fit the other two legs

Press a glide into each foot

Turn the table over together

Screw the stop and the two leaf supports onto the leaf

Open the table and try the leaf

Store the leaf under the top