ROSENTORP

Lay out the legs and fit the barrel nuts and rods

Tap two dowels into each leg

Bolt two legs onto each column

Fit barrel nuts and rods in the beam

Tap two dowels into each end of the beam

Join the columns with the beam

Fit barrel nuts and short rods in the column tops

Tap a dowel into each column top

Push the two spring catches into the frame ends

Fit the leaf holders with dowels and cams

Screw four angle brackets under the frame

Lower the frame onto the columns

Tighten four cap nuts onto the rods

Screw the brackets to the column tops

Lay the top halves face down and lock them

Screw the slides to the top

Lift the top onto the frame together

Screw the slides to the frame from below

Pull the halves apart and screw the slide ends

Pull the halves apart and take out the transport screws

Unfold the leaf and lay it in

Push the halves together and lock the latches