16×
Screw the cam bolts into both sides
Base cabinet with drawer/2 doors, 91.5 × 61 × 76 cm
1 h 10 min · one person · 28 steps · 16 panels · 78 fittings
Screw the cam bolts into both sides
Tap dowels into the bottom and join it to one side
Turn the cam locks
Slide in the back panel
Tap in the other dowels and fit the other side
Turn the other cam locks
Click the clips onto the front rail and screw it on
Square it up and nail one corner
Nail the other bottom corner
Nail the top corner
Nail on the two plastic brackets at the top
Nail the back all along
Stand it up and screw on the back rail
Screw in the suspension fittings
Hang it on the suspension rail
Adjust the suspension fittings
Click on the covers
Click the back onto the drawer sides
Slide the bottom in and screw it to the back
Screw the front fittings on and click the front onto the drawer
Click the gallery rails on
Screw the runners into the cabinet
Put the drawer on the runners
Push in the shelf pins
Lay the shelf on the pins
Press the hinges into the doors
Screw the mounting plates to the sides
Clip the doors onto the plates